[. . . ] Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) , declares that this Equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/ EC. De/ This product is intended to be used in the following countries: GB, IS, AT, NL, LU, BE, FR, DK, SE, NO, FI, PL The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku, Tokyo, 108-0075 Japan. [. . . ] De/ This product is intended to be used in the following countries: GB, IS, AT, NL, LU, BE, FR, DK, SE, NO, FI, PL The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku, Tokyo, 108-0075 Japan. the Authorized Representative for EMC and product safety is Sony Deutschland GmbH , Hedelfinger Strasse 61 , 70327 Stuttgart , Germany. For any service or guarantee matters, please refer to the addresses given in separate service or guarantee documents. This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Keep the wireless transmitter away from equipment with strong magnets, such as microwave ovens, or large loudspeakers. If you use more than one set of S-AIR products, position them away from each other to avoid cross talk. Install this wireless transmitter and S-AIR products at least 50 cm away from people. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. On cleaning Clean the wireless transmitter only with a soft dry cloth. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzene. [. . . ] On cleaning Clean the wireless transmitter only with a soft dry cloth. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzene. [. . . ]